Lightweight cement with controlled density and samples of cement stones were sent to one of the cementing companies in Gulf region. Oil – well cement was manufactured in accordance with the requirements of the Customer’s specific well. Customer can check the properties of our cement in his laboratory and compare with used.

ADIPEC-2010 is the largest oil and gas exhibition in the Middle East region, held once every two years, brought together more than 1500 companies from around the world, representing their new technologies and products to visitors in the Arab region.

The window in a casing with diameter 146mm during the period from October, 24th till October, 27th has been cut

One more branch of Joint-Stock Company "SSK" has decided to cooperate with Drilling Innovation Co. It was - Krasnoyarsk

So, during the period from October, 17-th till October, 18-th 2010г Drilling Innovation Co and Krasnoyarsk branch of Joint-Stock Company «Siberian Service Company» have made orientation and Whip-stock setting in open hole on the well №103 Dulisminsky OGC-field.

Drilling Innovation cut the Window in 6 5/8” Casing on the Priobskoe Oil field (Well No.4827) in the period 30-31 July, 2010

Drilling Innovation’s technologists and drilling crew under the direction of Fedchenko S. and Siberian Service Company’s technologist Aksinin S. set the hydraulic whipstock BS-168 on the depth 2145 m. For window milling was used two reaming mills with OD 146,0 and 145,5 mm.

On August 11th , 2009 Drilling Innovation cut the another window in the well no. 129 (well cluster no. 142 Priobskoye oilfield) for Siberian Service Company Close Corporation. The window in 6.614” casing was cut at 8530’ depth.