Noticias
- Detalles
In very difficult weather conditions we had to assemble and run the whipstock with hydraulic anchor on the well No.1013 Samburgskogo condensate field. Despite the 45-degree cold the hydraulic system HAS-7" for 7' casing was assembled and run to the depth of 3246m. The window cutting process was finished during 9 hrs. Wall thickness - 10.36 mm at a zenith angle of 33 degrees.
- Detalles
Next window in 6-5/8” casing with application of hydraulic whipstock was provided by Drilling Innovation’s technologist in well no. 23715, Berezovsky field.
- Detalles
Drilling Innovation Co. has shipped two o sets of hydraulic whipstocks, KLEN HAS -9 type agreed by contract with the Customer for Indonesia. The sets are optimized according to agreed specifications and are packed in original boxes for shipping by airfreight.
- Detalles
On urgent request of Orenburgburneft JSC the whipstock services were provided in 6-5/8 casing with application of hydraulic anchor whipstock anchor, KLEN HAS -6 type. Zenith angle is 63 degrees.
Window was needed for accurate entry to formation specified by Samaraneftegaz JSC. The job was provided with orientation and accepted as be successful.
- Detalles
In late February Drilling Innovation run the hydraulic type whipstock for 5-3/4” (146 mm) casing in the well № 17 Aktanyshsky field.
This is a new field for Drilling Innovation where our company have provided the engineering and technological support for window cutting process at a depth 4740’ (1441 m) . The window was cut in the interval 4740-4750ft (1441,0-1444,0m) and 1,5m of rat hole.
- Detalles
On February 15th Drilling Innovation LLC set the whipstock in 6-5/8” production casing on well no. 1111 Khancheyskoye field, Yamal, West Siberia
After orientation by compact telemetry system the anchor was landed and shear bolt was cut on 22 Klb. The window was cut on 7959 – 7669’ and 21’ rat hole was drilled.